<aside> ‼️ This document, and its associated pages, are confidential and is intended for internal-use only. The link for this should NOT be shared with customers or outside the Quilt group.
</aside>
The P5 Pole Mount is a custom-engineered accessory designed to deliver both power and Ethernet connectivity through an integrated USB-C cable. Its durable clamp system, equipped with protective rubberized grips, ensures the device remains securely fastened, while a discreet anti-theft crossbar provides added security without drawing attention.
The mount offers a full range of motion, featuring 360° horizontal rotation and extended vertical adjustability to accommodate a variety of use cases. The center pole is fully hollow, allowing the included USB-C cable to be routed internally for a clean, concealed appearance.
For installation, the P5 Pole Mount can be affixed to flat surfaces using high-strength double-sided adhesive or secured with traditional screw mounting.
<aside> 💡 Note: This works only with the P5 terminal
</aside>
Discounts or promotions may be offered on a case-by-case basis so check with a supervisor for more detailed information.
The pole mount includes a USB-C cable, two-sided grip tape to securely fasten it, and a pair of keys for the crossbar.
Place the P5 device in the pole mount. Ensure the rubber grips are holding the device securely.
Slide the crossbeam over the P5 terminal into the slots on either side of the device. Make sure the cutout for the indicator lights is on the left side.
Use the attached keys on the back to lock the cross bar into place.
Plug the USB-C cable from the adapter block into the P5 terminal.
<aside> 💡
The USB-C cable has a special elbow joint to prevent the cable from being damaged when the mount is rotated.
</aside>
Plug a USB-C charging cable into the adapter block to provide power.
If using ethernet, attach an ethernet cable to the adapter block and enable Ethernet on the P5 terminal.
