The WisePOS E terminal is a wireless countertop terminal for Quilt subsidiaries. This state-of-the-art card reader accepts chip, contactless NFC, or swipe making taking transactions easier than ever.
Our credit card readers are plug-and-play; Simply connect it to a local Wi-Fi network, enter the pairing code, and start taking payments in minutes.
The WisePOS E device is also low-maintenance with no additional upkeep required. Updates happen automatically using the Wi-Fi network with no interruptions and no hassle.
The terminal retails for $400 USD and $450 CAD though prices may vary so check with a supervisor for more detailed information.
To view the terminal’s parts and features, see the WisePOS E product sheet.
<aside> 💡 Note: This terminal only works for Merchants using Stripe. For Merchants on Adyen, they must use the P5 or S1F2 terminals.
</aside>
<aside> 💡 Note: A USB wall outlet is NOT included. The merchant purchase a USB wall charger at most electronics / office stores.
</aside>
When the merchant first receives the device, it should come partially powered up. Use the supplied wall charger to begin charging the device to full power. The charging options according to the Stripe docs are the Micro-USB port, 10W 5V2A (2000mA) AC Power Adapter, or Accessory dock. Micro-USB is the recommended.
Once charged for at least 30 minutes, hold down the power button on the right hand side until the screen turns on. Once the device is powered on, pressing the power button once will sleep/wake the device. To fully power off the device hold down the power button until the ‘Power Off’ option is shown on the screen, then select it.
If you need to replace the battery, lift up from the indentation at the bottom-center of the back cover to detach it from the device.
<aside> 💡 Note: Ideally the terminal should be powered off each evening and powered on each morning to receive automatic software updates.
</aside>